Windows တြင္ Boot Record Error ကို ေျဖရွင္းျခင္း

Boot Record ျပႆနာကို ႀကံဳေတြ႕ရၿပီဆိုရင္  Windows Opearting System ကို စတင္ Install ျပဳလုပ္တဲ့အခါမွာ ျမင္ရတဲ့ Install Windows Now ဆိုတဲ့ေနရာကို သြားရပါမယ္။ ဒီေနရာမွာ Install Now ဆိုတဲ့ Button ကို ႏွိပ္ရမွာ မဟုတ္ဘဲ၊ Repair your Computer ဆိုတာကို ႏွိပ္ရမွာျဖစ္ပါတယ္။ ဒါဆိုရင္ System Recovery Option ဆိုတဲ့ Box ေလးေပၚလာမွာ ျဖစ္ပါတယ္။
System Recovery Option Box မွာ Windows 7 ဒါမွမဟုတ္  မိမိတင္ထားတဲ့ Windows 8 အစရွိတာေတြကို ေရြးခ်ယ္ေပးၿပီး၊ Next Button ကို ႏွိပ္ရပါမယ္။ Start Repair ကိုႏွိပ္ၿပီး Boot Error မ်ားကိုေျဖရွင္း၍ရပါသည္။

I can't Login to Graphical interface Ubuntu 14.04 with Vmware Easy Install

******************************************************************
******************************************************************
Vmware Easy Install

PLEASE WAIT! VMware Tools is currently being 
installed on your system. Depending on the 
version of Ubuntu you are installing, you may 
log in below and use the system during 
intallation. Otherwise, please wait for the 
graphical environment to launch. Thank you.

******************************************************************
******************************************************************
ubuntu login:_

I can login and use the command "sudo /etc/init.d/lightdm start" to go to the graphical interfaces， but I have to do it every time I use this system.

And I have waited for a very long time and VMware still told me to wait.....

Answer:

Follow the 3 Steps ...

1. Restore the /etc/issue file:
   sudo mv /etc/issue.backup /etc/issue
2. Restore the /etc/rc.local file:
   sudo mv /etc/rc.local.backup /etc/rc.local
3. Restore the /etc/init/lightdm.conf file:
   sudo mv /opt/vmware-tools-installer/lightdm.conf /etc/init

Then reboot.

http://stackoverflow.com/questions/10740243/ubuntu-intallation-is-stuck-at-vmware-tools-installation

How to Print to a Shared Mac OS X Printer from Windows 7 & Windows 8

There are a number of indirect ways that you can trick Windows 7 and Windows 8 into printing from a shared printer attached to a Mac, but the best way to do it is through Bonjour. That’s because with every version change - either between Windows or OS X - the process gets muddled and a new solution has to be devised. But Bonjour has been fairly reliable even as both operating systems have evolved. In this tutorial, you’ll learn how to set up OS X so that its shared printers are available to Windows computers and devices.
NOTE: This guide has been updated for Mac OS X Mountain Lion (version 10.8).

How to Enable Print Sharing in Mac OS X

In Mac OS X, first open System Preferences. In the Internet & Wireless section, look for the Sharing button. Click on it.

The Sharing window opens. Enable the checkbox near Printer Sharing. OS X then lists the printers installed on your Mac.

You can go ahead and share them from here. Check the box near the printer you want to share. Then, in the Users section, configure the sharing permissions. Select the users you allow to print and the permissions level assigned.
When done, close the Sharing window, and the System Preferences window.

How to Share a Printer Connected to a Mac OS X

Even though enabling printer sharing provides the options required to share a printer, there’s another way to share printers. First, printer sharing needs to be turned on.
Open System Preferences. In the Hardware section, look for the Print & Scan button and click on it.

The Print & Scan window opens. Here, you see the printers installed on your Mac. Select the printer you want to share. Then, check the box that says "Share this printer on the network".

If you want to customize how the printer is shared, click the Sharing Preferences button.

How to Add a Mac OS X Shared Printer to Windows 7 or Windows 8

Download Bonjour Print Services for Windows from the Apple Support website. As of this writing, the current version is Bonjour 2.0.2, which supports Windows XP Service Pack 2 or later. It also works in Windows 8. Installation is straightforward: run the setup file, agree to the terms (read them, if you’d like) and keep clicking Next until it’s finished.
Now, run the "Bonjour Printer Wizard". Make sure your Mac is up and running, connected to the network and the printer is connected and turned on. If all is well, Bonjour will automatically detect the shared printers. They’ll be listed as "PRINTER NAME @ COMPUTER NAME". Choose the printer you’d like to install and click Next.

If prompted, install the printer drivers. If you have the printer drivers installed on your computer already, you can choose them from the list. If not, you’ll have to locate them manually by clicking Have Disk. Make sure that you install the proper drivers for your specific printer model, otherwise you may have limited or no printer function.

After choosing the drivers, you’ll have an opportunity to verify the settings before finishing the printer setup. Click Finish if all looks good.

Now, the OS X shared printer will be available in the Devices and Printers panel of Windows. You can print to your Mac OS X shared printer as you would on a local printer, from the Print dialogue of the program you are using.

How to Change the Priority of Wired/Wireless Network Cards in Windows

Network ၾကိဳးေရာ wireless ပါအသံုးျပဳၿပီး အင္တာနက္ႏွစ္လိုင္းကို တစ္ျပိဳင္တည္းအသံုးျပဳေနၿပီဆိုလွ်င္ ဘယ္လိုင္းကို ဦးစားေပးအသံုးျပဳေနလဲၾကည့္ဖို႔ရန္ႏွင့္ ေျပာင္းလဲလိုလွ်င္.......

Do you ever plug in your wired network card while your wireless card is still enabled? Ever wonder how Windows chooses which one to use? Here’s how to see the default priority—and how to change it if you want.

How to See the Current Network Card Priority

You’ll need to open up a new command prompt window and type in the following command:

netstat -rn | more

The | more part of the command will make sure that it doesn’t go flying off the screen, requiring you to scroll backwards—speaking of which, you should read our article about how to scroll backwards in the command prompt with the keyboard.

At the top of the output you’ll see the Interface List, and the column on the left-hand side shows the metric of the interface. You’ll notice that the loopback interface has the highest priority, followed by my wired Gigabit card, and then my wireless card.

If you’re wondering what all the other cards in the list are about, I’ve got some VPN software loaded, as well as VMware Workstation, all of which create virtual adapters that show up in the list.

How to Change the Network Card Priority

To change the priority, head into Network and Sharing Center and click on the Change adapter settings link on the left-hand side—or you can quickly open the network connections list by typing ncpa.cpl into the Start Menu search box.

Now that we’re in here, choose the network card that you want to change the priority for, right-click it, and choose Properties from the menu.

Now select the Internet Protocol Version 4 item in the list, and click the Properties button.

Now click the Advanced button at the bottom of this window…. getting tired of clicking yet?

And now, finally, we’re at the place where you can make the change. Uncheck the box for Automatic Metric, and then type a number into the Interface Metric textbox. You can consult the list that we found in the command prompt earlier to know what metric to assign—you’ll probably want to assign it something higher than 1, since that’s used for the loopback adapter.

You may want to go ahead and change the priority for your other card as well, just to be sure that it is assigned the proper priority.

Window XP အေခြရွိၿပီး CD Key မရွိသူမ်ားအတြက္..............

I have only tried it on a XP Professional CD, but it should work for the Home and OEM versions of Windows XP from restore disks.
How-To: Find Windows XP Product Key from the Windows XP CD:
1) Insert Windows XP cd into a working computer.
2) Exit the Autorun introduction.
3) Open “My Computer”
4) Right Click on the Windows XP cd-rom drive and select explore.
5) Open the USWXP32P_ZX folder. (It may be as a hidden folder. If you cannot locate the folder, you may also search for unattend.txt and mark “Search Hidden Files”.)
6) Open the sysprep folder.
7) Open unattend.txt
Your CD’s product key is contained within the unattend.txt file.

1) ၀င္းဒိုးေခြကို ၀င္းဒိုးတက္ေနတဲ့စက္ထဲထည့္ၿပီး unattend.txt ဖိုင္ကုိရွာပါ။ Hidden ျဖစ္ေနမည္ျဖစ္ေသာေၾကာင့္ Search ကိုသံုးၿပီးရွာပါ။ unattend.txt ေတြ႔လွ်င္ ဖြင့္ၾကည့္ပါ။ CD Key ဆိုၿပီးေရးထားပါမည္။ 

How To Add Control Panel To Start Menu In Windows 10

Many PC users use Control Panel to access various admin tools and settings such as Device Manager and User Accounts. Since Start menu in Windows 10 is different from the familiar Start menu of Windows 7 or Vista and the fact that Control Panel isn’t located on the Start menu with default settings, many users are finding it difficult to open the Control Panel in Windows 10.

Even though one can type Control Panel in the Start menu search box and then press enter or right-click on the Start button and then click Control Panel to open the same, you might want to place the Control Panel on your Start menu in Windows 10.
If you want to pin Control Panel tile to the right-side of the Start menu, just like in the above picture, complete the instructions mentioned in Method 1. And instead, if you want to pin Control Panel to the left-side of the Start menu, just below your user name, please follow the instructions mentioned in Method 2.
Method 1

Pin Control Panel tile to the right-side of the Start menu

Step 1: Open Start menu, type Control Panel in the search box to see Control Panel in the search result.

Step 2: Right-click on the Control Panel and then click Pin to Start option to add Control Panel tile to the right-side of the Start screen.

Method 2

Pin Control Panel to the left-side of the Start menu

Step 1: Right-click on the empty area of Taskbar and then click Properties. This will open Taskbar and Start Menu Properties.

Step 2: Click on the Start Menu tab (see picture) and then click Customize button to open Customize Start Menu dialog.

Step 3: Here, under Pin to Start list, select Control Panel, click OK button and then click Apply button to pin Control Panel to the left-side of the Start menu. That’s it!

As you might have observed, you can also pin various other items such as Homegroup, Videos, Downloads and Network to the Start menu. To remove a pinned item from the Start menu, right-click on it and then click Remove from this list option.

Built-in "Administrator" Account Enabled in Windows 8

Widnow 8 မွာ Password ေမ့သြားရင္ Build in Administrator ကို Enable လုပ္ၿပီး Password Delete လုပ္လို႔ရပါတယ္။ Build in Administrator ကို Enable လုပ္ဖို႔ရာ Window 8 DVD ျဖင့္ Boot လုပ္ပါ။ 
1) Repair Your Computer ကိုႏွိပ္ပါ။
2) Language ေရြးၿပီး Next ႏွိပ္ပါ။
3) Troubleshoot ကိုႏွိပ္ပါ။ 
4) Advanced Options ႏွိပ္ပါ။ 
5) Command Prompt ကိုႏွိပ္ပါ။
6) ေအာက္မွာျပထားတဲ့ Command ကိုရုိက္ထည့္ပါ။

copy c:\windows\system32\utilman.exe  c:\

1 file(s) copied confirmation ဆိုၿပီးျမင္ေရရပါမည္။

7) ေနာက္ထပ္ ေအာက္မွာ ျပထားတဲ့ Command ကိုလဲရိုက္ထည့္ပါ။

copy c:\windows\system32\cmd.exe   c:\windows\system32\utilman.exe

Replace လုပ္မွာလားေမးေနလွ်င္ Y ကိုႏွိပ္ပါ။

8) Window 8 DVD ကိုထုတ္ပါ။ စက္ျပန္စပါ။
9) Window Login Screen တြင္ Ease of Access icon ကိုႏွိပ္ပါ။ Command Prompt Window ပြင့္လာပါမည္။
10) ေအာက္မွျပထားတဲ့ Command ႏွစ္ေၾကာင္းကို ရိုက္ထည့္ပါ။

net user Administrator password

net user Administrator /active:yes

password သည္ Administrator အေကာင့္ကုိေပးခ်င္တဲ့ password ထည့္ပါ။

11) စက္ျပန္စပါ။ စက္ျပန္တက္လာလွ်င္ Administrator အေကာင့္ေပၚေနမည္။ Administrator ျဖင့္ Login လုပ္ၿပီး တစ္ျခားအေကာင့္ မွာ password ကိုျဖတ္ခ်ပါ။
12) Window 8 DVD ျဖင့္ Boot ျပန္လုပ္ၿပီး Command Prompt ေရာက္ေအာင္ျပန္သြားပါ။ (Step 1 to 5)

13) copy    c:\    c:\windows\system32\utilman.exe 

Y ႏွိပ္ၿပီး စက္ျပန္စပါ။



http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-windows-8-a.html